Elma Instruments Instrument - sita 7

Set consisting of 1 red and 1 black cord, 100 cm, provided with 4 mm banana plug with protective cap and thin 2mm test stick.

Blue 100cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Elma 3037 is atrue RMS clamp meter in a handy design for easy measuring of AC currents. The instrument has a good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3037 has low pass filter and "Inrush" for measuring on start/inrush currents. With the "Volt sense" function you are able to detect the voltage without contact. THe instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteries and manual. Technical data:Current AC: 0-60-300AResolution: 0,01-0,1AAccuracy: ±2% + 5 DDisplay: 3 5/6 cifferMax. display: 5999Clamp size: 24 mmBattery: 2x1,5V LR44 (incl.)Size: 147x60x31 mmWeight:100 g

Digital stopwatch with lap, 1/100 s, date and clock function. The stopwatch has a handy design and are amongst others intended for timing at leakage test on gas installations.

Type 6005, for 4 mm banana plug. Technical data: IEC 61010: Cat II 1000V

Testprobe blue = 140mm

Test probe to connect in the end of a test lead with banana plug. Specially suitable for use in multi installation testers. Technical data: IEC 61010: CAT II 1000V (without protection cap), CAT IV 600V (with protection cap)

Kewmate 2012R is the top model in the series of smart pocket multi meters with open current clamp. The instrumentet is offering new functions and is equipped with True RMS measurement, automatical DC zero adjustment on current measurement, and a new and bigger clamp which is able for measuring all up to 120A AC/DC. Kewmate 2012R has a big display which is easy to read on, with analog bargraph, and it measures voltage, current, resistance, continuity, frequency, and is equipped with automatical range selection, data hold, and auto shut off. The instrumentet is in pocket size, and is delivered with a robust rubber protection, where the test leads and the current clamp can be mounted seperately, and then be protected. The instrumentet complies with IEC 61010-1 CAT III 300V, and is delievred with test leads, current clamp, rubber protection, batteries and manual. Technical data: Voltage DC: 0-600m-6-60-600 V Voltage AC: 0-6-60-600 V Current AC/DC: 0,01-60-120.0A (with clamp) Resistance: 0-600-6k-60k-600k-6M-60M Frequency: 0-10-100-1000-10k-100k-1000k-10MHz Capacity: 0-40n-400n-4-40-4000F Clamp size: ø12 mm Max display: 5999 Battery: 2x1,5V LR03 (incl.) Size: 126x87x21 mm Weight: 210 g

Kyoritsu 8035 is a unique new phase sequence tester which with no elektrical contact is showing phase sequence/magnetic field. The 3 clips are mounted outside on the insulation on three separate phases. When it is three real and different phases then the instrument will show it with big and very bright red and green LED for phase sequence. The instrumentet complies with CAT IV 600V and is because of that, together with the extra bright LED s very usefull for outdoor purpose. Kyoritsu 8035 complies with IEC 61010-1 KAT IV 600V / III 1000V and is delivered in a bag incl. batteries and manual. Technical data: Working voltage: 70-1000V AC Frequency: 45-66 Hz Working temperature: -10.....50°C Clamp size, clip: ø 2,4-30mm leads Battery: 4x 1,5V LR6 (incl.) Size: 112x60x30mm Weight: 380g

Red/black 1000V/20A Kit including 1 red and 1 black PVC-wire, 1 mm2, 100 cm, equipped with 4 mm angle banana plug with protection tube and test probe with option for mounting clip and more. Technical data: IEC 61010: CAT II 1000V

The Elma DTR-880A is a smart instrument, perfect for measuring and recording temperatures and relative humidity in environments where monitoring of these parameters is vitally important. The DRT-880A has an extra large display and many applications, such as control of temperature and / or relative humidity in homes, offices, computer rooms, storage rooms, hospitals and laboratories, etc. The instrument is equipped with multi display for displaying both alarms, temperature and relative humidity. The instrument has built-in clock and memory for displaying max / min values of temperature and relative humidity, as well as switching between ° C and ° F. The Elm DTR-880A comes complete with battery, table support and wall mount.

Prøveledning 2611 silikone 100 cm grøn Produkt beskrivelse: Kvalitetsprøveledning med fast kappe, dobbeltisoleret højfleksibel silikone.Opfylder IEC 6...

CA 703 multimeter Produkt beskrivelse: CA 703 er et smart kompakt multimeter med auto-range. Instrumentet har stort display og måler spænding og strøm...

Elma ACT612 is a new smart battery tester for easy and fasty test of the capacity in 6 & 12V closed lead acid batteries, GEL batteries and car batteries. The instrument makes a 20 hour capacity test in 20 seconds, with display of the battery voltage and the battery capacity directly in Ah. The instrument is able to perform test continuesly without any rest periods to cool down. The instrument is usefull for e.g. cars, motor bikes, alarm systems, UPS systems, telephone communication equipment, tools and more. It is recommended that you normally recharges or change the battery when the capacity is below 65 %. a volt meter is only able to measure the voltage, not the capacity in the battery. This new battery tester is solving this problem by testing both the voltage and the capacity in few seconds. The resultats is displayed on the build-in LCD display. The tester is warning if the poles are not correct mounted on the test leads. Elma ACT612 gets power from the battery and is automatically testing on 6 & 12 V maintenance free/closed lead batteries, GEL batteries and car batteries from 1,2Ah to 100Ah. Is delivered incl. a bag and manual.

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest Protect test kit is a further development of the known Easytest Classic Kit (desciption above). The instrumentet is having a lot of new functions eg. is it possible to see if data ports is connected. With the trace probe is it possible to detect ISDN/ADSL lines. Easytest Protect emits a sine signal with can cause in reduced "Crosstalk", and it is therefor possible to trace on live telephone cables. Easytest Protect can be connected through the integrated RJ 11, RJ 45 or ther included crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery probe: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight probe: 220 x 40 x 25 mm / 80 g

Type 5004, extra powerfull, isolated crokodile clip, 1000V/20A. Technical data: IEC 61010: Cat III 1000V

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50...+1100°C Accuracy: ±0,4% eller ±1,5°C, or what is highest Size: 130x3 mm

Universal DMM test lead kit. The kit makes it possible to do all kiinds of measurements, quick and simpel. The kit includes two silicone-test leads, two crokodile clips, two test probes, two flexible grab clip and two flexible crocodile clips. All the accessories are made in highest quality and complies with IEC 61010-1 CAT II 1000V. The kit is delivered in a practical hard case. TEKNISKE DATA IEC 61010: Kat II 1000V

Fuse 400mA, 6x32mm, 1000V, for:Elma 251sElma 257sElma 319sElma 805sElma 807sElma 878

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +900°C Size: 130x8 mm

Elma 3039 is a true RMS clamp meter in a handy design for easy measuring of både AC and DC currents. The instrument has a extra good resolution down to 10mA, a big backlighted display, smart data hold and automatically zero-adjustment. Elma 3039 has low pass filter and "Inrush" for measuring of inrush currents. With the "Volt sense" function is it possible to detect voltage - without contact. The instrument complies with IEC 61010-1 CAT III 600V and is delivered incl. batteris and manual. Technical data: Current AC/DC: 0-60-300A Resolution: 0,01-0,1A Accuracy: ±1,5% + 5 D Display: 3 5/6 digits Max. display: 5999 Clamp size: 24 mm Batteries: 2x1,5V LR44 (incl.) Size: 147x60x31 mm Weight: 100 g

Type 121039, super thin test pin which is ideal for eg multi-plugs and other plugs where there is not much space. For mounting on 4mm banana plug, 1000V / 30A. Complies with IEC 61010-1 CAT III 1000V.

5,7064454104e+12

Universal power adapter for various instruments.

Blue 200cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V