Instrument

Handhållen 3-i-1-oscilloskop FNIRSI 2C53T kombinerar ett 50 MHz digitalt oscilloskop med dubbla kanaler, en 4,5-siffrig true RMS-multimeter och en 50 kHz DDS-signalgenerator i ett portabelt instrument.

Utformad för underhåll, forskning, fabrik, skola, hobbyanvändare och hemmabruk använder den FPGA + ARM + ADC-arkitektur, stöder sparande av vågformsskärmdumpar och har en 2,8-tums 320*240 HD-färgskärm.

• 250MS/s samplingshastighet med 1Kpts inspelningsdjup
• Maximal uppmätt oscilloskopspänning på ±400V
• 13 signalvågformer med justerbar frekvens, amplitud och duty cycle
• Mäter AC/DC-spänning, AC/DC-ström, resistans, kapacitans, diod och kontinuitet
• Inbyggt 3000mAh uppladdningsbart litiumbatteri med upp till 6 timmars standbytid

FNIRSI 2C53T ger yrkesverksamma och entusiaster mångsidiga funktioner för test, mätning och signalutgång i ett kompakt verktyg.

Zircon HD70 Stud and Steel Rule Finder Product Description: Zircon HD70 OneStep® is a smart and practical tool for quickly locating wooden and metal studs. The stud finder has a display that indicates signal strength and the location of the instrument in relation to the stud. As something completely new, the tester lights up red precisely when the center of the stud is found. When dangerous AC voltage is detected, the instrument warns with a clear sign in the display. The instrument comes with an operating manual.

Technical specifications:

• HxWxD (mm): 180x74x34
• Weight (grams): 159
• Battery type: 9V 6F22 (not included).

The Ancel BM200 is an innovative Bluetooth car battery tester that allows users to easily track battery health by connecting to a mobile app on iOS and Android devices. Equipped with Bluetooth 4.0, the BM200 provides a reliable and fast connection, allowing the user to access detailed battery diagnostic data.

MultiScanner HD900c OneStep multifunction stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.

FNIRSI GC-01 strålningsdetektor

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

The Leica DISTOTM D110 is world’s smallest laser distance meter with integrated Bluetooth® Smart technology. By using its precise measurements users can create floor plans and sketch easily by connecting it with the Leica DISTOTM sketch app on a smartphone or a tablet. Whether an interior designer, painter or building contractor, the Leica DISTOTM D110 will make it easier to get the job done right.Distance and area measuringBluetooth® SmartIP 54 dust and splash water protectionRemovable pocket clip

The FNIRSI LCR-P1 is a multifunction electronic component tester designed for fast identification and measurement of transistors, diodes, resistors, capacitors, inductors and other electronic components. It features automatic component recognition, a 1.44-inch color display, NEC infrared signal decoding and built-in miswiring protection for safe operation. The device simplifies testing by automatically detecting connected components and displaying key parameters without manual setup. Powered by a 300 mAh rechargeable battery with USB-C charging, it is suitable for workshop, educational and home electronics use.

FNIRSI DPS150 is a compact programmable laboratory power supply designed for precise voltage and current control in electronics testing, servicing, and educational applications. The device features a 2.8-inch IPS color display, low-noise output below 20 mV ripple, and support for multiple power sources including DC input, USB-C Power Delivery, and Quick Charge. Advanced safety protections, preset memory profiles, and stable digital regulation make it suitable for powering sensitive circuits, microcontrollers, audio systems, and laboratory projects. Its portable aluminum housing and efficient cooling system ensure reliable operation during extended use in both workshop and field environments.

The Ancel AD310/AC103 scanner is an advanced diagnostic tool that allows you to quickly and efficiently identify technical problems in your vehicles. It is ideal for drivers who want to monitor the technical condition of their car on their own, as well as for professionals looking for reliable equipment for everyday work.

FNIRSI GC-03 WT – multifunktionell detektor för joniserande strålning

FNIRSI GC-03 WT är en avancerad men samtidigt extremt användarvänlig multifunktionell detektor för joniserande strålning som kombinerar mätning av kärnstrålning, elektriska fält och magnetiska fält. Redan från det att den slås på erbjuder den hög precision, snabb responstid, en tydlig 2,4-tums färgskärm och intelligenta larmsystem. Detta verktyg är utformat för både medvetna hemanvändare och yrkesverksamma som vill ha verklig kontroll över sin omgivning – när som helst, var som helst.

The FNIRSI S1 is a digital multimeter designed for accurate and versatile electrical measurements in both professional and DIY environments. It supports AC/DC voltage measurement, resistance, continuity testing, frequency detection, battery capacity measurement and temperature reading. Additional functions include NCV (non-contact voltage detection), diode testing, phase and neutral wire identification and True RMS measurement for more accurate readings of non-linear signals. The device features a clear inverted VA HD display for easy readability, along with automatic range selection, data hold and overload protection. A built-in 1000 mAh rechargeable battery with USB-C charging ensures convenient and portable operation.

Elma 1000A is a handy safety voltagetester with smart design features. The instrument has a clear LED indication of relevant voltages and automatically polarity indication. The tester has a smart connection with 19mm spacing to fit directly into the wall socket and allows one-hand operation. Elma 1000A is performed in IP 54 and meet particular IEC 61010-1 CAT III 690V and EN 61243-3.

Diazed sikring DZ II 25A, 5 stk

Yato YT-73080 multispänningsmätare Digital multimeter

VoltAlertTM technology for non-contact voltage detectionAutoVolt automatic AC/DC voltage selectionLow input impedance: helps prevent false readings due to ghost voltageLarge white LED backlight to work in poorly lit areasTrue RMS for accurate measurements on non-linear loadsMeasures 10 A (20 A overload for 30-seconds)Resistance, continuity, frequency and capacitanceMin/Max/Average with elapsed time to record signal fluctuationsCompact ergonomic design for one-handed operationCompatible with optional magnetic hanger (ToolPakTM) for hands free operationCAT III 600 V safety ratedIncludes:4 mm silicone test lead setHolsterUser manual

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

The FNIRSI SG-004A is a compact mini signal generator offering professional functionality in a pocket-sized design. It features a 2.4-inch HD backlit display, adjustable brightness, real-time curve viewing, and multi-mode operation. With ≤0.2% measurement accuracy, drop protection, USB-C charging, and up to 24 hours standby, it is ideal for field engineers, technicians, and electronics enthusiasts. The device supports a wide range of signal types and testing tasks, including voltage/current testing, speed simulation, actuator adjustment, and inverter diagnostics, providing reliable and portable performance wherever you need it.

The FNIRSI DSO152 is a compact portable oscilloscope with a 2.8" display, 2.5MS/s sampling rate, 200kHz bandwidth, and ±400V measurement capability. Despite its small size (99 × 68.3 × 19.5 mm), it features automatic parameter settings, a built-in 1,000mAh battery, and a 1kHz test signal source for probe calibration. Lightweight and easy to carry, it is ideal for mobile service, workshop, and educational applications, providing accurate, convenient measurements in a pocket-sized device.

Elma DT-128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures the moist 20-40mm n the material. Just hold the ball-tip against the surface and the moist is immediately shown in the large, backlit display. Elma DT-128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use incl batteries and manual. Note: The material to be measured should be at least 20-40mm (depending on the material) to provide a reading.

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

Elma 106 indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Technical data: Voltage range: 100-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 144x17 mm Weight: 50 grams

FNIRSI GC-02 strålningsdetektor

FNIRSI GC-02 är en modern, bärbar strålningsdetektor som i ett kompakt hölje erbjuder funktioner som vanligtvis återfinns i betydligt större och dyrare enheter. Den detekterar beta- (β), gamma- (γ) och röntgenstrålning med hjälp av ett precisionsräknarrör av Geiger-Müller-typ. Den erbjuder mätning i realtid, dataloggning, intelligenta ljud- och ljuslarm, tidsövervakning, viloläge samt ett inbyggt litiumbatteri som kan laddas direkt. Det är ett pålitligt verktyg för alla som vill ha medveten kontroll över sin omgivning och säkerställa säkerheten.

Nätverkstestsats