Danfoss Värmekontroll

Danfoss 087B1164 rörmokeritillbehör

Danfoss 084N1012 rörmokeritillbehör

Demanding applications, with IP65, for valve range B, 10W ac / 18W dc

Danfoss 087N0011 rörmokeritillbehör

Pressure switch 060-110166 from DANFOSS A/S

RT switches are used in general industrial and marine sectors. The RT single pressure switches series consist of a variety of ordinary controls including neutral zone pressure switches, safety pressure switches for steam boiler plant, and gold plated fail

Danfoss 087B1165 rörmokeritillbehör

Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industrial applications. The KP series are suitable for gaseous media and air. They are fitted with a single-pole switch changeover (SPDT), and can control single-phase

Danfoss RAVK Thermostatic actuator. Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders (e.g. storage tanks) or heat exchangers in radiator heating systems. Combined with RAV it is intended for temperatu

Danfoss range limiting pins.

Danfoss RAVI Thermostatic actuator. Self-acting thermostatic actuator primarily used for temperature control of small hot water cylinders - either storage type cylinders or instantaneous hot water heaters. The controller closes on rising temperature.

Danfoss 065F2034 rörmokeritillbehör

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

Gear motors for AB-QM, DN 40-100 Modulating 24 V ac. Running time 7.5 s/mm or 15 s/mm 3-point gear motor. Gear motors that are used together with 2- and 3-way valves VRB, VRG, VF and VL in dimensions up to DN 80.

KP thermostats are used for regulation, monitoring and alarm systems in industry. The KP series is equipped with a single-pole changeover contact. The thermostat is equipped with a 1-pole switch (SPDT), and can control a 1-phase ac motor up to 2 kW directly.

Danfoss AMV 20 actuator. AMV 20/23 are actuators for three point control and AME 20/23 are actuators for modulating control, furthermore AMV(E) 23 actuators have safety function. The spring return actuators can be used to provide safety shut off on power

Danfoss AMV 150 actuator. AMV 150 is an actuator for three point control for use in district heating systems. The actuator is available for the Danfoss ECL Comfort controllers or any other three point controls.

Danfoss 082H8059 rörmokeritillbehör

Nipple/nipple set with flat gaskets

Sensor element for AVTQ with complete stuffing box

Danfoss ECL Comfort 210 regulator 230V. The ECL Comfort 210 is an electronic weather compensated temperature controller for use in district heating, central heating and cooling systems. Combined with the intelligent ECL application keys, the controller

ECL Comfort 120 is a universal 1-circuit regulator for use in district heating stations, district heating-based systems and boiler systems.

CS pressure switches have a three-pole switch and adjustable differential. The pressure switches are fitted with a manual switch that will lock the contact system in the open position independently of the pressure in the system.

AMZ 112 is typically used in connection with HVAC applications, domestic and commercial central heating applications, domestic hot water and chilled water applications, solar energy plants, priority control of hot water supply and heating (diverting funct

EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way valve program is especially to use in closed circuits with low differential pressure, but demanding moderate flow rates. Valve body in dezincification res