Elma Instruments - sita 4

The EASYTEST kit, is a combination of a tone transmitter and a inductive trace probe. The trace probe is easy to use and solves problems in searching, identifying and trace cable installations. EASYTEST is able to find insulated cables on distances up to 60 cm, and is able to follow the cables up to 15 km. The instrumentet is able to trace/finding cables, split pairs, pairs, reversed pairs, short curcuits, disconnected leads and more. EASYTEST is an ideal instrument for the telecommunication/network installer tracing a single wirepair, the alarm installer who has to trace the cable route to the alarm system, the electrical installer who has to trace the cabling in a building and more. EASYTEST is used a vary of apllications where it is not possible to find a cable/wire phusical or visual. EASYTEST is even more equipped with two Talk-sets and is therefore able to use two way communication in systems up to 15 km. a very userable feature in places, where it s not possible to use walkie-talkies or mobile phones. Easytest can be conencted via the RJ 11 connector or the supplied crocodile clips. Technical data: Voltage protection: 110V AC/240V DC Range: 15 km Battery transmitter: 1x9V 6F22 (excl.) Battery receiver: 1x9V 6F22 (excl.) Size/weight transmitter: 68 x 96 x 25 mm / 150 g Size/weight receiver: 220 x 40 x 25 mm / 80 g

Sikring for Elma 515/525/859/898 - 0,44A Produkt beskrivelse: Sikring 0,44A, 10kA/1000V10x38mmf/ 515X, 525, 812CF, 859, 869, 898 Tekniske specifikatio...

HIK Pocket2 termisk lommekamera 256x192px -20~400C Produkt beskrivelse: HIKMICRO Pocket2 er et smart og super kompakt termisk lommekamera med en termi...

Elma Thermo X250 is a smart compact thermal camera, with a resolution of 256x192 pixels = 49,152 pixels. The camera is super easy to operate with point-and-shoot functionality, fixed focus and without a lot of complicated settings. Thermo X250 takes a thermal image together with a 2MP visual image, and saves both images on an SD card in the camera. The images can be transferred to a PC via a USB-C cable, or by inserting the SD card into the PC - an iOS or Android app can be downloaded for free where you normally download your apps, and the images can be transferred wirelessly to a Smartphone or Tablet via Wi-Fi.

You can download a user-friendly analysis and reporting software for free on our website, and with Thermo X250 it is easy to document temperature-related work tasks in a professional way - without the big investment, and without having much experience in the mysteries of thermography. The built-in rechargeable Li-ion battery is charged via USB-C - charger included.

Elma Thermo X250 comes ready to use in a box with USB Type-C cable, charger, 32GB SD card and manual.

Elma Thermo X50 is a smart compact thermal pocket camera, with a resolution of 256x192 pixels = 49,152 pixels. The camera is super easy to operate with point-and-shoot functionality, fixed focus and without a lot of complicated settings. Thermo X50 takes a thermal image together with a 2MP visual image, and saves both images on an SD card in the camera. The images can be transferred to a PC via a USB-C cable, or by inserting the SD card into the PC - an iOS or Android app can be downloaded for free where you normally download your apps, and the images can be transferred wirelessly to a Smartphone or Tablet via Wi-Fi.

You can download a user-friendly analysis and reporting software for free on our website, and with Thermo X50 it is easy to document temperature-related work tasks in a professional manner - without the big investment, and without having much experience in the mysteries of thermography. The built-in rechargeable Li-ion battery is charged via USB-C - charger can be purchased separately, or you can use the PC or a standard Smartphone charger with USB-C cable.

Elma Thermo X50 comes ready to use in a box with USB Type-C cable, 32GB SD card, wrist strap and manual.

Elma X-Reel is a new smart cable roll with safety test lead. The roll is equipped with a practical shoulder strap and a smart handle, which makes the work with Elma X-reel very simple. Elma X-reel is also equipped with at unique system, which is able to filters out the wire, when using the cable roll. Elma X-Reel er perfect on measuring on earth connections and protection wires, where you normally have to use very long wires to measure continuity. Elma X-reel includes 33 meters 0,75 mm2 black PVC wire. Can be loaded with max 2A. Complies with IEC 61010-1 CAT III 1000V/CAT IV 600V. Technical data: Length: 33m Size: 0,75mm2 Current: max 2A IEC 61010: Cat III 1000V, Cat IV 600V

Type 1060, multi-blade 4 mm banana plug for screw mounting, 36A. Technical data: IEC 61010: 33V AC / 70V DC

kraveværktøj i kuffert VFT-808-MIS Produkt beskrivelse: Fint kraveværktøj fra Value, der kommer i kuffert, et godt supplement til ens eksisterede udst...

Elma 46 is a easy and very econimical instrument for fast failure finding on LAN and Coax installations. The right solution for the professional user who wants a little bit more, than just test the cable. By one push on the TEST button the instrument will measure cable length and full wiremap (pin connection) with control for both short curcuits, break downs, swithed and splitted pairs. A lot of the above failures can even be tested before you have attached your remote in the opposit end. The result is clearly been shown in the large display. The instrumentet is evenmore able to save up to 100 testsresults in the memory. Elma 46 is together with the numbered remote ID s, perfect for determination of mismatched cable installations. A row of terminator ID’s is mounted in the patch panel. When the instrument is doing the cable test i the opposit end, it will show which terminator ID it is looking at. Elma 46 is equipped with a safety circuit which protects against telco rings and loop voltages, if it by a failure is connected to an active telephone line. Elma 46 is delivered with pouch, UK manual, adapter cable and terminator ID#1. Technical data: Cable length: 0,5-350 m Resolution: 0,5m Accuracy: 5% + 1 m Memory: 100 measurements Safety Curcuit: Withstand telco voltage and loop voltage Connector: RJ-45, BNC Cable types: PDS (UTP, FTP, STP), Coax Battery: 6 x 1,5V LR 03 (Incl.) Size: 152 x 72 x 35 mm Weight: 360 g

Kyoritsu K3132 is a safe small and handy insulation tester, whick complies against even the toughest demands. The instrumentet has following advantages and functions: - Chooseable test voltage 250, 500 og 1000 V - Lockable test not – Then you can have both hands free - Mirror display scale – For safe reading - Built in ohm meter for measuring on earth conenctions - Built in voltage meter 0-600V - Exstra safe and robust – Dust and splashproof IP 54, complies with IEC 61010-1 CAT III K3132 is delivered incl. batteries, test leads and manual. Technical data: Test voltage: 250, 500 og 1000V user choseable Measuring ranges: 0-100, 0-200, 0-400 M Measuring current: > 1mA Ohm meter: 0-3 / 0-500 Measuring current/voltage: > 200 mA / 4 V Voltage meter: 0-600 V AC Battery: 6x1,5V LR06 (inkl.) Size: 106x160x72 mm Weight: 560 g

Elma BM878 is a real TRUE RMS CAT IV multi meter with build-in Insulation tester. The insulation tester has five optional test voltages and build-in 200mA ohm (resistance) meter for measuring on equipotential bonding. Elma BM878 is equipped with a big illuminated double display and fast analog bargraph. The instrument measures true RMS voltage, current, frequency, resistance, capacity, diods, continuity and temperature. Elma BM878 has a lot of extra features like. max/min, data hold, auto-shut off, automatically/manual range selection and VFD function, which makes the instrument capable of measuring true values, after inverters. The multi meter complies with EN61010-1 CAT IV 600V and is delivered incl. remote control, test leads, batteries, type-k temperature probe and manual.

Laserbrille for grøn laser Produkt beskrivelse: Dæmper alle andre farver, men lader den grønne farve, fra f.eks. Elma kryds- og linjelasere, skinne kl...

Elma Volt Stick Bright is putting in new standards for safety and smart voltage detection. Elma Volt Stick Bright is a touchless voltage detector, which without electrical contact easy and safely indicates AC voltage. The tester is managed by a programmable micro processor, and it has a lot of advantages.•The strongest LED light on the market, which also is visible in sunlight. •Clear sound level at voltage indication. •Optional sensitivity 20-1000V and 230V•Powerfull forwarded torch•Automatically self test and battery test•Allways on – can not be operated incorrectly•Multi flat tip – fits in all outletsElma Volt Stick Bright comply with IEC 1010-1 CAT IV 600V, is UL listed and delivered incl. batteries and manual.Technical data:Voltage range: 20-1000V ACBatteries: 2x 1,5V LR03 (incl.)Size: 152xØ17mmWeight: 40g

Black, Banana plug type 3260 is a series of IEC 1010 CAT III 1000V 36A plugs, which are able to have in many kinds and colours, all in safety designs and for banana plug with a safety hood. The plugs are mounted in a Ø12 mm hole and is tighten on the back with a nut. Type 3265 with threaded rod and 2 nuts for fastening the wires. Type 3266 for spade connectors or solder connection.

Fuse 10A, 10x38mm, 20kA/600V for Elma BM251, 257, 821, 829, 5800, 6700

Davo-Meg 1002 insulation tester with charger and cahrge cable.

Elma RT606A is a handy electronic phase sequence tester that, with powerful LEDs show rotary direction and indicate the individual phases. The instrument meets IEC 61010-1 CAT III 300V and comes with safety test leads, 3 insulated alligator clips and 3 test sticks. Technical data: Working Voltage: 150-500V Frequency: 50/60Hz Measuring current: <3.5 mA Dimensions: 130 x 72 x 30 mm Weight: 190 g

Elma 9400 is an unique instrument, combining AC and DC leakage- and milli amp measurements. Furthermore Elma 9400 offers standard multimeter functions.Elma 9400 is indispensable for automotive, electronics and electrical installation, combining high resolution AC and DC leakage measurements. This means that Elma 9400 can be used for many purposes. Find the part of the car discharging the battery with DC, or the traditionel AC leakage in the switch board with shuts off the RCD or the DC component from the electronics, dangerously diabling RCD functionality. Elma 9400 can also be used to measure charinging currents on small DC charging circuits, battert loads and small loads like e.g. the light in the car. Elma 9400 clamp multimeter covers it all.Elma 9400 measures 0,1mA...10,00A DC and 0,1mA...20,00A AC and is provided with standard DMM functions like voltage- and resistance measurement. The instrument fulfills CAT IV and is delivered ready to use with bag, batteries, testleads and manu

Type 5004, extra powerful and robust, insulated crocodile clip, 1000V / 20A.

Elma BM 821 is a new accurate and robust category IV 1000V multi meter, which, due the high safety is suitable for measurement in all of the installation. Elma BM 821 is equipped with a large bright 4 digits double display and fast analogue bar graph. The instrument is measuring voltage, current, frequency, resistance, capacity, diodes and continuity. Elma BM 821 has a lot of extra functions e.g. data hold, auto shut-off, automatically/manually range selection and RS232 port for PC-communication. With the PC-communication and the Windows software (orders separately), is it possible to make online data logging, where all the measured data can be viewed as: Digital display, analogue display, curve/graph and table. The instrument is UL listet, comply with IEC 61010-1 CAT IV 1000V and is equipped with high efficiency fuses with control function. Elma BM 821 is delivered incl. manual, battery, test leads and a robust rubber protection cover. Technical data:Voltage: 0-100m-1000m-10-100-1000V AC/DC Accuracy: DC: ± 0,08%+2D, AC: ± 0,5%+3D Current: 0-600-6000-60m-600m-6-10A AC/DC Accuracy: DC: ± 0,2% + 4D, AC: ± 0,6% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-6000-27mF Frequency: 10 - 100 kHz Diode test: 0-2000mV, 0,4mA < 3,5V DC Continuity test: < 10 acoustical signal Display: 4 og 3 5/6 digits Max. display: 9999 or 5999 Battery: 1x9V 6F22 (incl.) Size: 208 x 103 x 64,5 mm Weight: 635 g

Kyoritsu 2300R is the worlds first true RMS AC/DC clamp meter with an open clamp. The instrumentet is able to, due to its narrow clamps, to used everywhere - even in boards where the leads is sitting very close to eachother. Kyoritsu 2300R measures true RMS AC/DC currents up to 100 A and is equipped with data hold, auto shut off, automatical zero-adjustment and non-contact voltage indication. The voltage incication gives an acustiscal signal when the clamp is close to a , wher the voltage is above app. 80V. The instrumentet complies with IEC 61010-1 CAT III 300V and is delivered i a bag incl. batteries and manual. Technical data: Current: 0,1-100A AC/DC Resolution: 0,1 Accuracy: ± 2%+5D Display: 3 1/2 digits Max display: 1049 Clamp size: 10 mm Battery: 2x1,5V LR03 (incl.) Size: 161x40x30 mm Weight: 110 g

MI 3155 Eurotest XDe is the newest flagship of Metrel’s most advanced line of multi-functional measuring instruments and is designed specifically for testing in industry. What differentiates this instrument from the rest is its ergonomic design and an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touch screen display. It is fully compliant with functionality standards (e.g. IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. Besides those, the instrument supports a wide range of tests and measuring functions, including on-line voltage monitoring, phase sequence testing, varistor testing, PI/DAR calculation, luminance measurement, discharge time testing, ISFL measurements, IMD tests as well as functional and visual inspections.

Elma BM076 is a robust true RMS clamp meter, which is specially suitable for everybody who works with water, heat and ventilation. With this handy clamp meter is it possible to measure currents up to 600A and the multi meter function makes it possible to measure voltage, frequency, capacity, resistance and continuity. Furthermore the instrument is equipped with temperature measurement, together with a standard type-k probe, makes it possible to measure temperatures on many applications. As something quite new Elma BM076 has build-in 3-lead fase sequence and a smart motor rotation indicator, which is able to help with mounting motors properly. Another new function is VFD, which make the instrument able to measure true values of frequency and voltage after frequency converters. The AmpTip function makes it possible to measure currents from 0-60A with a great accuracy. Elma BM076 has a big backlighted display and is equipped with datahold, peak-hold, max/min/avg, relative function and voltage detector. Elma BM076 is UL listet and complies with IEC 61010-1 CAT IV 300V and III 600V and is delivered in a bag incl. temperature probe (-20 to 250°C), test leads, battery and manual. Technical data:Current with clamp: 0-60-600A ACResolution: 0,01-0,1AAccuracy: ±1,8% + 5DCurrent AmpTip: 0-60,00ACurrent through connections: 0-200-2000microA DCVoltage: 0-600.0V AC/DCFrequency: 5Hz–1000HzTemperature: -40...400°CCapacity: 0-200-2500FResistance: 0-600-6k-60kContinuity test: <100 acustical signalDisplay: 3 5/6 digitMax display: 5999Clamp size: 30mmBattery: 2x1,5V LR03 (incl.)Size: 222x76x37 mm

Blue, Banana plug type 3260 is a series of IEC 1010 CAT III 1000V 36A plugs, which are able to have in many kinds and colours, all in safety designs and for banana plug with a safety hood. The plugs are mounted in a Ø12 mm hole and is tighten on the back with a nut. Type 3265 with threaded rod and 2 nuts for fastening the wires. Type 3266 for spade connectors or solder connection.

Type 5004, extra powerfull, isolated crokodile clip, 1000V/20A. Technical data: IEC 61010: Cat III 1000V