Lexar NM610 Pro, 1TB, M.2 Gen3 x4
-
Pickup at the Dateks office0.00 €
-
DPD Pickup Parcel CabinetWithin 1-2 working days0.00 €
-
Parcel terminalWithin 1-2 working days0.00 €
-
Post OfficeWithin 1-2 working days0.00 €
-
Omniva parcel machineWithin 1-2 working days0.00 €
-
SmartPosti parcel terminalWithin 1-2 working days0.00 €
-
Unisend parcel terminalWithin 1-2 working days0.00 €
-
Venipak parcel locker or pickup pointWithin 1-2 working days0.00 €
-
Delivery throughout LatviaWithin 1-2 working days4.12 €
- Capacity: 1 TB
- Type: NVME
- Max. reading speed (Seq. Read): 3300 MB/s
- Max. writing speed (Seq. Write): N/A
- Form factor: M.2 80mm (2280)
- Interface: PCIe 3.0 x4
We offer to purchase a Lexar M.2 80mm (2280) format SSD drive with a 1 TB capacity.
This SSD drive has a compact and modern M.2 connector.
This SSD drive uses the latest NVME standard with PCIe interface, which allows simultaneous data transmission across multiple data lines. Thanks to this technology, the drive is ideally suited for those who work with large files, play computer games or deal with video editing.
3300 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
- this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
This SSD drive has an M.2 80mm (2280) format.
This SSD drive interface is PCIe 3.0 x4. If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at vornuqxalize.online section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Category 1 - SSDs
Category 2 - Interne SSDs
Description1 - Lexar SSD NM610 Pro - 1 TB - M.2 2280 - PCIe 3.0 x4 NVMe
Description2 - Designed to elevate your PC experience with faster load times and transfer speeds from boot-up to shut down, the Lexar® NM610 PRO M.2 2280 PCIe Gen3x4 NVMe SSD will boost your computing experience with speeds up 3300MB/s1 read and 2600MB/s1 write. It’s supported by the PCIe Gen3x4 NVMe 1.4 technology standard for higher performance and efficiency.Upgrade to the Lexar NM610 PRO M.2 2280 PCIe Gen3x4 NVMe SSD and get 6x the speed of a SATA-based SSD3 . With PCIe 3.0 and NVMe 1.4 technology standard, and speeds of up to 3300MB/s¹ read, experience faster performance so you can do more in less time.With fast transfer speeds of up to 3300MB/s1 read and of up to 2600MB/s1write, the Lexar NM610 PRO M.2 2280 PCIe Gen3x4 NVMe SSD is the ideal choice for PC enthusiast upgrading their PC building one from scratch for faster boot-ups and app load times.Featuring a compact and light M.2 2280 form factor, the Lexar NM610 PRO M.2 2280 PCIe Gen3x4 NVMe SSD supports easier installation on your laptop or PC.Unlike traditional hard disk drives, the NM610 PRO SSD has no moving parts, so it’s built to last. On top of that, it’s also shock and vibration resistant², making it one robust and reliable SSD.All Lexar products undergo extensive testing in the Lexar Quality Labs, facilities with thousands of different cameras and digital devices to ensure performance, quality, compatibility, and reliability.
EAN - 0843367128723
Manufacturer - Lexar
Manufacturer - Lexar Media
ManufacturerID - LNM610P001T-RNNNG
MPN - LNM610P001T-RNNNG
Name - M.2 1TB Lexar NM610PRO 2280 PCIe3.0 x 4
PackageHeight - 18
PackageLength - 141
PackageWeight - 50
PackageWidth - 144
UPC - 843367128723
Weight - 0.047

